|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silent Coat Starter Set - 4 sheets of Silent Coat sound
deadening, a panel of Isolator 4 and a panel of Sound Absorber. This pack is a
cost effective introduction to the Silent Coat range and is also perfect for
treating the critical areas around your car doors and speakers for a superb
upgrade.
|
Silent Coat Door Kit - 8 sheets to cover approx 8.5 sq.ft, perfect for treating the critical areas around your speakers and in your doors.
|
Butyl and aluminum constrained layer damping material. Designed for damping metal or plastics and reducing unwanted structural vibration, rattles and sound from inside or outside of your car.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This double thickness 4mm version of Silent Coat deadening mat is perfect for those areas that suffer from bad noise or vibrations, such as wheel arches, boot floor and transmission tunnels. Install on a vehicles internal metal panels to absorb and reduce vibrations, rattles and road rumble.
|
Similar in specification the AERO-Multi contains combination of AERO-Butyl and the AERO-Neoprene. It's the fast and cheap way to reach an almost perfect result of required noise reduction.
|
2-door Sound deadening starter kit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silent Coat 2mm Damping Mat uses mass loading to lower panel resonance and absorb structural vibrations, converting them into low level heat. Stop those nasty rattles, eliminate road and outside noise, insulate your vehicle and dramatically improve the sound of your car audio stereo system. Volume kit contains 20 sheets
|
Specifications like the AREO-Butyl but with reduced damping characteristic but highly stabilization effects. Perfect also to cover holes in the structure.
|
Dodo Dead Mat Hex is a self adhesive, foil backed sound deadening vibration damper. Simply cut, peel & stick Dodo Dead Mat Hex on the interior sheet metal of any vehicle to destroy unwanted vibrations & structural noise. Make those panels as dead as a Dodo!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This double thickness 4mm version of Silent Coat deadening mat is perfect for those areas that suffer from bad noise or vibrations, such as wheel arches, boot floor and transmission tunnels. Install on a vehicles internal metal panels to absorb and reduce vibrations, rattles and road rumble. Contains 12 sheets
|
Silent Coat Black sound deadening has a jet black aluminium top finish. This mat is perfect for classic and vintage vehicles, or for installations where the mat may be visible. Silent Coat Black is also 50% thicker than the regular mat for enhanced vibrodamping.
|
Silent Coat MultiLayer Extra is a new generation high-end product based on a dense mass loaded butyl mastic composite base. The high mass and damping factor of the loaded layer allows Multilayer Extra to fight vibrations in the car more effectively while the elasticity of the butyl material increases convenience of installation. Volume pack contains 10 sheets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete 2-door Sound deadning starter kit
|
The PERFECT sound deadening package for your small - medium sized hatchback car compromising of 20 sheets of Silent Coat 2mm deadening panels, and 3 Large sheets of Silent Coat Isolator 10.
|
Silent Coat 2mm Damping Mat uses mass loading to lower panel resonance and absorb structural vibrations, converting them into low level heat. Bulk pack contains 40 sheets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This unique product offers higher performance than any single application mat! Use Silent Coat Plus for vibration control PLUS thermal insulation. 2mm deadening layer topped with a layer of foam to reduce external noise in one sheet!
|
This double thickness 4mm version of Silent Coat deadening mat is perfect for those areas that suffer from bad noise or vibrations, such as wheel arches, boot floor and transmission tunnels. Install on a vehicles internal metal panels to absorb and reduce vibrations, rattles and road rumble.
|
Silent Coat MultiLayer Extra is a new generation high-end product based on a dense mass loaded butyl mastic composite base. The high mass and damping factor of the loaded layer allows Multilayer Extra to fight vibrations in the car more effectively while the elasticity of the butyl material increases convenience of installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silent Coat Black sound deadening has a jet black aluminium top finish. This mat is perfect for classic and vintage vehicles, or for installations where the mat may be visible. Silent Coat Black is also 50% thicker than the regular mat for enhanced vibrodamping.
|
This unique product offers higher performance than any single application mat! Use Silent Coat Plus for vibration control PLUS thermal insulation. 2mm deadening layer topped with a layer of foam to reduce external noise in one sheet!
|
With the Landrover being notoriously noisy, we have put together an extensive kit to help eliminate external noise.
|
|
|
